Kreg KMA4100 Crosscut Station - for Miter Saw Results - Variable Circular Saw Guide - Portable Crosscut Station - Carpentry Tools & Accessories

Product Information

The Crosscut Station is even compact enough to make it a portable cutting solution when you need accurate crosscuts and angle cuts on the go. Kreg offers you a whole system of drilling templates for pocket hole joinery, our "Pocket-Hole Jigs". For less than the cost of a sliding miter saw, you could have two tools: a circular saw and a Crosscut Station. I’m sharing how to set it up, how to use it, how to know if it’s right for you, and my review of the tool. Could use some improvements such as saw guides made out of heavier material they do move slightly with the weight of saw.

They come with detachable material support blocks, which are great for working with extra-long boards. The Crosscut Station gives you the capabilities of a mitre saw – using just a circular saw and the precision of guided cutting. Once assembled you’ll need to set the depth of your saw to just barely grazing the MDF baseplate and then run through with a kerf cut. This site uses data saved in the cookie files and other technologies to help with navigation and give you an opportunity to provide feedback, analyse your use of our products and services. It was a quick fix, but when all is said and done, assembly is easy and fits pretty much all circular saws regardless of size and blade orientation.With the Kreg saw station, you can cut with your circular saw just as accurately as with a mitre saw.

First, I positioned the fixed guide rail on the right but noticed the blade was positioned too far to the right. Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. With this portable helper and your plunge or hand-held circular saw, you can create a fully-fledged cross-cut and mitre station in no time at all. Just know that if you’re using an impact driver like I did, but light on the trigger or turn it down to the lowest torque level. With the aid of the mitre stop, you can also make mitre cuts of 0° to 45° with the Kreg saw station.

Use material support wings and the detachable blocks to cut long boards safely by supporting your offcuts. The Crosscut Station fits many popular corded or cordless circular saws that have blades from 6-½” to 7-¼” in diameter.