This convenient remote is all about long exposure and time lapse shooting. You can shoot a sequence up to 100 hours long, split down to 1-second increments, and there’s a secondary timer that’ll repeat the first sequence, also with controllable frequency. Alternatively, the Captur can be used as a straightforward remote release, with the 2.4GHz wireless connection giving a range up to 100m, while Digital Channel Matching guards against unwanted signal interference.

Our used products are subject to wear and tear in comparison to brand new products. This also applies to accessories that are supplied with the camera including batteries which may have a lower optimum performance level/life expectancy. Use the ML-3 Modulite remote control set, which uses Infrared (line of sight) to trigger the camera. The range is 26 feet. (Compatible with select Nikon cameras.) Despite being a wired rather than wireless controller, the TC-80N3 still requires a single CR2032 battery to power its LCD display and all-round cleverness. Connecting to compatible cameras like the EOS 5D IV and 7D Mark II via a three pin plug, the unit’s features include a self-timer, long-exposure timer, interval timer and the option to set the number of shots in a sequence. It also works as a straightforward remote control, with the same basic functions as Canon's RS-80N3 camera remote, even with no battery fitted. It’s simple to use, with a switch that cycles between the four main operating modes, a start/stop button, LCD display illumination switch and jog control for altering the settings.So, as you can see, there certainly are a myriad of ways to trip the shutter on your camera to take a photograph, however some are more ideally suited to specific shooting situations than others. Lets look at the different situations you might find yourself shooting in and the best solution for each. This new Mini version does exactly the same (though it’s no longer capable of Windows and Mac connectivity), and is around half the size of the original. Remote range is increased to 120m, however battery life is slightly reduced at 3-4 hours. Why none of the manufacturers (especially Nikon) won't make a WiFi remote control with just small 10-pin plug as a transmitter?

Before using the remote control for the first time, remove the clear plastic battery-insulator sheet. Wi-Fi and Bluetooth triggers harness the power of your smart device for even more comprehensive remote camera control.To prevent light entering via the viewfinder from appearing in photographs or interfering with exposure, remove the rubber eyecup and cover the viewfinder with the supplied eyepiece cap ( 0 Cover the Viewfinder). Nikon's WT wireless transmitters enable fast transmission of images – either automatically or by manual selection – direct from your camera to an FTP server or computer, and they also allow you to import IPTC photo metadata into the camera's memory before shooting, so the data is automatically attached to images as they're shot. This saves critical time for editors as well as photographers. They also enable a number of other useful functions, including camera operation from a computer via Camera Control Pro 2, and simultaneous release of multiple remote cameras from one master camera, depending on which WT transmitter you use. Select models of Nikon 1 advanced interchangeable lens digital cameras as well as certain COOLPIX compact digital cameras can utilize the ML-L3 wireless remote control, which uses an Infrared signal to tell the camera to snap a picture. You can be up to 16 feet away from the camera, however you will need to be in ‘line of sight,’ so the camera and ML-L3 can communicate via the Infrared signal. Use a smartphone or tablet to shoot