After a life in heavy engineering it used to be that, if it won't go with a big hammer get a bigger hammer. I just use a lump hammer and brute force. I still have a few "screw in" pegs that haven't already bent, and use them as plain pegs. I realise that some are "less able" and so have to try anything that may help but gadgets and labour saving devices are not for me just yet. Ryobi, as you say are OK especially for occasional use by old gimmers like me but not good for heavy regular use. DeWalt are very good but expensive and I think much loved by joiners and plumbers. when I worked in power generation we favoured Makita which we found fine for mechanical work. If the ground is hard, drill the Ground Dog screw in peg as far as possible, and then wind the wing collar down to the ground level to hold the peg securely

Screw In Tent Pegs Ezy Anchor Award Winning Screw In Tent Pegs

I carry a rechargeable SDS drill with an 8mm masonry bit for the really tough hard standings. Useful to wind the pegs out afterwards and spin the steadies up and down. Ground Dog screw in pegs are sold individually, and each Ground Dog screw in peg comes with an orange Hook Collar. It takes longer to screw in as it must go through more revolutions when screwing in and out (this will be time consuming if doing by hand) Take your point about it being dangerous though so may just go with some of the above and maybe a few extra long ones just in case.http://www. caravantalk. co. uk/community/topic/119191-pegging-down-the-awning/?hl=%2Bscrew+%2Bpegs&do=findComment&comment=1400706 http://www. caravantalk. co. uk/community/topic/117475-bit-of-a-basic-question-but/?hl=%2Bscrew+%2Bpegs&do=findComment&comment=1370899 Keep collections to yourself or inspire other shoppers! Keep in mind that anyone can view public collections - they may also appear in recommendations and other places. Instead of hammering your tent pegs in the old way, just screw these into and out of the ground in seconds with your rechargeable drill.

Screw Tent Pegs - ALDI UK Premium Screw Tent Pegs - ALDI UK

No plastic bit at the top which can break off. Easy to put in any type of ground with cordless drill. No, we are men -the more power tools the better! I've often wondered if I could convert my framing gun to fire awning pegs .... The constabulary might not like it much though Ryobi pulled a fast one with their one+ range. Once you buy into the system with a couple of tools and a battery it makes no sense to stray unless their tools are not up to the job in hand. As it is, their tools are of ample quality for all but the most dedicated DIYer. The Wing Collar is used with a Ground Dog screw in peg, when using the Anchor Plate Kit to secure the awning leg vertically. If the ground is hard, drill the Ground Dog screw in peg as far as possible, and then wind the Hook Collar down to the ground level to hold the peg securelyThe Wing Collar is used with a Ground Dog screw in peg, when using the Anchor Plate to secure the awning leg vertically. Anything will work on grass/soft ground, but the screw in type were almost impossible to get in when on hard standing. Are made of stainless steel, which makes it light weight and corrosion resistance, so it won’t rust Save time and effort setting up or taking down camp with these Australian designed and made pegs for tents or annexes.