Displej má diody, z nichž jedna ukazuje, že termostat má aktivované relé, které je zapnuto (chlazení nebo topení). Když připojím Termostat do sítě, tak mám na „vstupu 1“ napětí, signálka ukazuje „topení“, ale na vstupech 5 a 6 mi zkoušečka (jednoduchá tužková do zásuvky) neukáže žádné napětí, tj. STC-1000+ is an open source implementation of firmware(s) for the STC-1000 dual stage thermostat that add improvements and features over the version it is shipped with. Home brewing requires attention to detail in every step to achieve the desired flavor and quality of the final product.

This mini Temperature Controller is an excellent and convenient multifunction device for controlling temperature in Aquariums. then you may need to download drivers for the CP2102 or CH340G, you can find them at Silicon Labs for CP2102 or here for the CH340. Press and release: Display temperaturedifferential set-point and back to normal display after 2 seconds. For Starrag tool magazines features like tool breakage detection, tool coding, automated tool handling within an FMS can be implemented. The STC-1000 is a versatile small electronic temperature controller, with heating and cooling functions, plus audible alarm.When upgrading, the sketch will indicate (on the 'd' command output) if there are changes that might invalidate your current EEPROM data, and if so you might want to use the 'a'/'f' command even when upgrading, to make sure the data has sane defaults.

The STC machines are equipped with state-of-the-art tool magazines and tool changers manufactured by the Starrag Group. You'd need an Arduino board (like the Arduino UNO) and an STC-1000 thermostat with the proper hardware version (A400_P). For those that have got an STC-1000 that has an STM8 microcontroller, Emile is working on an awesome replacement firmware targeted at that architecture. Zahrnujeme zelený terminál, dvě svorky 1-2 jsou pro napájení AC 110 / 220V (230V), svorka 3-4 pro teplotní čidlo, svorky 5-6 pro topné relé 7-8 pro chladicí relé.Compared to the traditional thermostat that requires wiring, it is more convenient and safer to use, and it can be operated by people without any electrical foundation. Withdrawal shall not affect the legality of any data processing already carried out before withdrawing my consent. The STC-1000 controller is a versatile and inexpensive tool for controlling the temperature in various applications. Suitable to the following machines: beer dispenser systems, blast chillers, cold room, fish fridges, freezer counters, half height chillers/freezers, ice cream freezers, mini bars, upright display coolers/ freezers, upright storage freezers/ coolers, wall site freezers, wine display chillers. Best to feed it from below the board, as the reset button (which will still work) and other stuff is on the other side.